Quantcast
Channel: Embedded Community : All Content - All Communities
Viewing all 3140 articles
Browse latest View live
↧

General documentation about building embedded hardware based on Intel processor

November 13, 2017, 4:43 pm
$
0
0

I'm trying to find some document that overview process of developing embedded systems platform. I know what SoC I want to use and what capbilities system should have.

 

1. Where to start and what steps to take ?

2. How to obtain CRB for my SoC ?

3. Where to find schematics PCB modification guidelines for my SoC ?

4. Where to find BWG ?

4. How partners ecosystem works, are there manufacturing partners ? Who can design/develope firmware ?

5. How to validate platform during manufacturing ?

 

Is there any document like that ? It is very hard to find anything in Design Center especially something that will give general introduction. Also search not always return what is asked for.

↧
Search

Gordon Peak MBR bsp packages

November 14, 2017, 11:31 pm
$
0
0

Hi,

 

I'm looking for Gordon Ridge/Peak BSP packages to build the image using Yocto. Where do I find them?

↧
↧

Skylake package length

November 15, 2017, 9:48 am
$
0
0

Hi,

 

Wondering Skylake package length for DDR4 signals distributed as mch_22x48_len,  mch_22x66_len, mch_22x85_len is available.

Also, how to get relevant interposer lengths as mch_35x65_len, mch_35x120_len, mch_35x155_len?

 

Thanks,

Ehsan

↧

x550-AT2 firmware

November 15, 2017, 8:44 pm
$
0
0

now ,my X550-AT2 is blank, where can i get X550-AT2 firmware, and how to burn it in linux (centos)? thanks!

↧

how can i get crb and schematics of latestchipset and mother board

January 15, 2015, 10:49 pm
$
0
0

how can i get crb and schematics of latestchipset and mother board?

↧
↧

RMT process

November 16, 2017, 2:39 pm
$
0
0

Hi,

 

When RMT is data taken, wondering it's margining only one bit at a time OR multiple bits are margined simultaneously.

I would like to understand the sources of x-talk. Are only the nibble members are x-talk sources OR the byte members or only the associated strobe is the x-talk source?

 

Thanks,

Ehsan

↧

How to pragram EFI touch driver to support in TSE interface ??

November 16, 2017, 5:53 pm
$
0
0

How to pragram EFI touch driver to supprot  in TSE interface ??  Has anybody done that ?     my touch ic is that PenMount 9000 Touch screen Controller IC ,   请求大神帮助

↧

Yocto H264 multi-stream decode question ?

November 17, 2017, 4:51 am
$
0
0

Hello,

 

According to the release note (August 2017)

 

Intel Atom® SoC E3900 Family, Intel® Celeron® Processor N3350, and Intel® Pentium® Processor N4200 Board Support Package for Yocto Project*—MR3.1 Release

 

3.2.5 Unsupported or discontinued features (p17)

 

GStreamer VA PI multi-stream decode with H264 not more supported ?????

 

Is somebody doing multi-stream H264 decoding on Apollo Lake I ???

 

Is there an other way besides GStreamer ?

↧
Search

E3825 stuck in FspInitApi() Memory Init

November 15, 2017, 1:05 am
$
0
0

Hi Community,

 

I'm trying to port coreboot to a Intel Atom E3800 Board.

Kontron COMe-mBT10 (https://www.kontron.de/products/boards-and-standard-form-factors/com-express/com-express-mini/come-mbt10.html )

 

But I'm stuck in FspInitApi probably during the memory initalization.

The last post_code i get from coreboot is 0x92 that i can find in src/drivers/intel/fsp1_0/fsp_util.c just before

 

post_code(POST_FSP_MEMORY_INIT);

FspInitApi(&FspInitParams);

 

than some more post codes are send  0x32c 0x22d 0x32d 0x62d 0x22e 0x62e 0x52eb and last one ist 0x12f

after that i'm stuck. FspInitApi is supposed to return to ChipsetFspReturnPoint(EFI_STATUS Status, VOID *HobListPtr) in src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.c but it never reaches that point.

 

can someone tell me what these last 3-digits Post Codes mean ?

 

Thanks

Michael

 

↧
↧

eepromARMtool

November 20, 2017, 10:45 pm
$
0
0

　　Hello, our company is "Guangzhou Guangyou Communication Equipment Co., Ltd." from China. I'm looking for the eepromARMtool tool or source on ARM platform. Because we need to program the NVM of the i210 on some of our ARM based embedded products.

　　And I know I should have an Embedded Design Center (EDC) Privileged account firstly, but I check my profile management page, it shows that 'Level is Privileged & Status is Rejected'. I'm not sure it is right or not, so if my account is access, please send eepromARMtool to my company email : luhd@gyt.com.cn (registe the EDC) or my personal email : luhuadong@163.com. Thank you very much !

　　If there any information I need to submit, please let me know, contact me with email is okay. Thanks!

　　Have a good day!   * ^ _ ^ *

↧

Change Host Control2 Register APL GP

August 4, 2017, 12:56 am
$
0
0

Hello,

From document number 557556 (EDS vol 2) there is at Offset 3Eh Host Control2 Register (hostcontrol2), I would like to change hostctrl2_driverstrength does someone has the configuration and how to apply to a ABL build?

 

Regards,

Francesco

↧

COM Express Type 6 Module Has Built-in Kaby Lake Platform with Industrial-grade Wide Operating Temperatures and 4K

November 22, 2017, 11:32 pm
$
0
0

Axiomtek - a world-renowned leader relentlessly devoted in the research, development and manufacture of series of innovative and reliable industrial computer products of high efficiency - announces the release of CEM510, its new high-performance COM Express Type 6 compact module featuring triple displays, industrial-grade wide operating temperatures and rich expansions. The CEM510 is based on the Intel® Xeon® E3 and 7th generation Intel® Core™ i7/i5/i3 processors (codename: Kaby Lake-H) with Intel® CM238/QM175/HM175 chipset. The 125 x 95 mm system-on-module was designed for graphics-intensive applications over the Industrial IoT, including industrial control, medical imaging, digital signage, and gaming machines.

 

The newest system-on-module, CEM510, was designed for users who need fast computing power and stunning graphics performance. The enhanced features and superior performance reduce the design effort and accelerate time to market to meet customer demand. The rich display ports and expansion interfaces provide increased flexibility for the various market. The embedded module is equipped with dual 260-pin DDR4-2311 SO-DIMM slots with up to 32GB system memory. Its wide operating temperature range of -40°C to +85°C strengthens the adaptability of various harsh conditions. For evaluation and development purposes, Axiomtek also has the CEB94011, a carrier board designed to operate with the CEM510 for additional I/O and expansions interfaces. Integrated with Intel® Gen 9 graphics, and with the support of DX12.0, OCL 2.0 and OGL 4.3, the module presents excellent graphics performance with resolution up to 4K (3840 x 2160 @ 30 Hz). Three independent displays are supported through LVDS and three DDI ports supporting HDMI, DisplayPort, and DVI (one DDI supporting optional VGA).

 

The Intel® Kaby Lake-based CEM510 comes with multiple I/O connectors including four SATA-600 interfaces with RAID 0/1/5/10, one Gigabit LAN port with Intel® i219LM controller, four USB 3.0 ports, eight USB 2.0 ports, and 4-IN/OUT DIO port. Also, the module provides one PCIe x16 slot and eight PCIe x1 slots, as well as LPC and SMB expansion buses. Trusted Platform Module (TPM 1.2) is supported to provide efficient hardware-based data protection. This new powerful COM Express Type 6 module runs well with Windows® 10 and Linux operating systems. It also supports AXView 2.0 – intelligent industrial IoT remote management software - exclusively offered by Axiomtek.

↧

BIOS upgrade issue in GLK

November 29, 2017, 1:52 am
$
0
0

HI,

I download BIOS image #571539 "Gemini Lake Platform Reference Board BIOS Image Revision 45.4.01" from Intel Electronic Design Kit.

My target device is GLK RVP2, so I select file(\IFWI\RVP2_PROD\BtG2_VM_SPIDtpm_PROD\GLK_NR02_B0B0-NNNN_CPSF_SNS2_000080_2017WW45.4.01_NN.bin) for BIOS upgrade.

After I use Dediprog to flash, the RVP2 can't boot up successfully which is without any screen output and the port-80 is always 0000.

However, I can recovery the RVP2 by flashing the default BIOS image which is cloned from other's RVP2.

Did I miss some necessary steps?

↧
↧

The VPX Ecosystem White Paper

November 29, 2017, 12:20 pm
$
0
0

The-VPX-Ecosystem.gifSince its introduction in 2003, the VPX (VITA 46) standard has superseded the earlier VMEbus as the de facto board format for building rugged commercial-off-the-shelf (COTS) embedded aerospace and defense systems. Like most good open architecture specifications, VPX has evolved with the support of related complementary specifications standards that expand its ability to solve particular issues, such as new IO standards, better cooling methods, environmental enhancements and even test regimes. This ability to evolve and keep pace while new technologies and application requirements emerge helps to keep VPX relevant and maintain its stature as the form factor of choice for contemporary aerospace and defense applications.

 

Because the introduction of new complementary specifications standards is an ongoing and continual process, it is useful for the system integrator to have an overview of the contemporary VPX landscape. This white paper provides a concise primer on the current VPX ecosystem and how its various specifications can work together to architect a wide range of rugged high performance systems.

 

The numerous specifications standards that comprise the VPX ecosystem, most developed and defined under the auspices of the VITA trade association’s VSO standards body, are logically architected to solve a wide range of practical issues to enable the design of high performance aerospace and defense systems, including:

  • High speed serial IO backplanes
  • Backplane compatibility
  • Cooling
  • Fiber-optic connectivity
  • RF analog IO connectivity
  • Extended environmental qualification

 

Download this The VPX Ecosystem white paper to learn more about

 

Curtiss-Wright products based on Intel processors and VPX standard.

↧

I have some questions about E3845's minimum DTS

November 29, 2017, 3:19 pm
$
0
0

Hello

 

I use E3845 (Baytrail-I) processor.

I had some temperature tests....

this test is Low temperature test...

 

The following measurement results were obtained.

After booting, DTS did not change for about 10 minutes.(38:08 ~ 48:09)...

 

temperature measure time after boot

temperature sensor adjacent to the CPU (ºC)

measured CPU temperature (ºC)

DTS value

Wed Nov 15 11:38:08.270 2017-35.50-9119 (0x77)
Wed Nov 15 11:38:23.982 2017-34.50-9119 (0x77)
Wed Nov 15 11:38:47.806 2017-33.50-9119 (0x77)
Wed Nov 15 11:39:12.205 2017-32.50-9119 (0x77)
Wed Nov 15 11:40:34.494 2017-30.00-9119 (0x77)
Wed Nov 15 11:41:01.840 2017-29.00-9119 (0x77)
Wed Nov 15 11:44:51.742 2017-23.50-9119 (0x77)
Wed Nov 15 11:45:59.369 2017-22.50-9119 (0x77)
Wed Nov 15 11:46:30.379 2017-22.00-9119 (0x77)
Wed Nov 15 11:47:27.899 2017-21.00-9119 (0x77)
Wed Nov 15 11:48:09.160 2017-20.50-9119 (0x77)
Wed Nov 15 11:48:12.584 2017-20.50-8118 (0x76)
Wed Nov 15 11:54:35.253 2017-16.50-5115 (0x73)

 

 

 

I started search the reasons and found the following parts in CPU Monitoring With DTS/PECI.

 

So, What is the minimum reportable temperature for E3845 (BayTail-I) ?????????  

 

Regards,

JC

↧
Search

17-inch SXGA Kaby Lake Fanless Touch Panel Computer

November 30, 2017, 2:05 am
$
0
0

Axiomtek - a world-renowned leader relentlessly devoted in the research, development and manufacture of series of innovative and reliable industrial computer products of high efficiency - is pleased to introduce the GOT317-502-FR, its new industrial-grade fanless touch panel computer powered by the latest 7th generation Intel® Core™, Celeron® and Pentium® processors (codename: Kaby Lake) with the Intel® H110 chipset. The high-quality touch panel PC adopts a 17-inch SXGA TFT LCD display with 5-wire flat resistive touch screen, featuring 350 nits brightness.

 

Ideal for factory automation, infotainment, digital signage, and other industrial applications, the GOT317-502-FR supports LGA1151 socket-type processors for the customer looking for greater flexibility. It offers two types of power input: 12/19/24V DC power input with a terminal block connector and a 19V 6.32A AC power adapter. With a swappable hard drive design, users can plug in a standard 2.5" SATA HDD quickly and easily. Moreover, the industrial touch panel PC has a reserved I/O module space for customers to install a suitable I/O module including fieldbus module, DIO module, and COM module (default) by different demands.

 

The 17-inch SXGA GOT317-502-FR is equipped with dual 260-pin DDR4-2400 SO-DIMM slots with up to 32GB system memory. Its wide operating temperature of 0°C to +40°C and up to 1G vibration endurance as well as an IP65 front bezel allows this all-in-one industrial panel PC to be used in harsh conditions. A remote power switch is available for added convenience, allowing users to remotely reboot and control power on/off. Furthermore, panel mount, VESA mount, desktop stand and wall mount kits are supported for various application needs.

 

Rich I/O interfaces include two RS-232-422/485 ports, four USB 3.0 ports, two Gigabit LAN ports (Intel® i219LM and i211AT), one HDMI v1.4, one VGA (up to 1920 x 1200 60Hz), one DisplayPort v1.2 (DP++), and one audio (Mic-in/Line-out). For maximum expansions, this noise-free 17" human machine interface supports two PCI Express Mini Card slots - one can be used for an mSATA storage card. It also offers an optional Wi-Fi 802.11 b/g/n module and WLAN antennas for wireless connectivity. Furthermore, the Intel® Core™-based GOT317-502-FR features built-in speakers for multimedia applications.

↧

E3827/3845

December 1, 2017, 8:37 am
$
0
0

Had many board built with the E3805/15/26/27 and 45 processors and did not have any problems powering up.

My last batch with E3827 and 45 will not power up. The PMIC raises V1P0A, V1P2A, V1P8A, V3P3A and then raises RSMRST#.

The processor never responds with SLP_S4#.

I do not have access to PMC_SUSCLK0 or ILB_RTC_TEST#

I did add an addition power source for VNN_S but the sequence does not make it to where it is turned on.

↧
↧

C3000 (denverton) platform Harcuvar - want to boot legacy mode bios to install 32 bit ubuntu

December 2, 2017, 9:50 pm
$
0
0

How and if it is possible to used a 32bit OS on this eval board (HARCUVAR) hence first thing is to boot USB installation with legacy bios not UEFI.

 

Message was edited by: Micha Yardeni

↧

substitutes for silicon substrates

December 4, 2017, 9:38 am
$
0
0

Dear Sirs.

 

I'm writing on behalf of professor Mikhail Provotorov from Russian Chemical-Technological University of D.I. Mendeleev.

In this year Prof. Provotorov finished research-development of technology for obtaining diamond materials, substitutes for silicon substrates.

We believe, the introduction of this technology will help to create a new microchips generation.

 

We are trying to contact your representative department to offer a new technology.

I would be grateful if you could assist me with the best contact in this case.

 

Best Regards.

Vadims.A

↧

Modular Transportation Embedded PC with E-Mark, EN 50155 and DNV 2.4 certified - tBOX500-510-FL

December 7, 2017, 1:05 am
$
0
0

Axiomtek - a world-renowned leader relentlessly devoted in the research, development, and manufacture of series of innovative and reliable industrial computer products of high efficiency – is proud to announce the arrival of the tBOX500-510-FL, a modular powerful fanless embedded system featuring vehicle, railway and marine-related certifications, industrial grade temperatures and various I/O connectors. The multi-purpose transportation box PC comes with the onboard 7th generation Intel® Core™ or Intel® Celeron® processor 3965U along with onboard two DDR4-2133 SO-DIMM slots supporting up to 32GB system memory. It offers two I/O module slots and a wide selection of value-added modules (VAM) to meet different user requirements and customizations. The rugged tBOX500-510-FL is certified with E-Mark, ISO 7637-2, EN 50155, EN 50121, DNV 2.4, EN 45545-2 and IEC 60945.

 

The tBOX500-510-FL supports a wide temperature range from -40°C to +70°C and anti-vibration of up to 3 Grms. The fanless embedded box PC equipped with intelligent power management offers ACC on/off delay, shutdown delay and over/under voltage protection. It supports a wide voltage input range: 9V to 36V DC for vehicle applications, 14V to 32V DC for railway & marine applications, and 16.8V to 137.5V DC for railway applications. For system integrators with extensive storage needs, the box computer offers two 2.5” SATA HDDs and one mSATA. The new transportation embedded system is well suited for transportation-related applications such as security surveillance, onboard devices controller, truck fleet management, data transfer, and onboard passenger infotainment system.

↧
Viewing all 3140 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>